3 Steps to using E-ONE IPL hair removal machine at home
Step 1. Clean the skin
The skin area to be treated by the E-One IPL has to be perfectly clean and clear from any cosmetic product.
Step 2. Apply Optical Gel, Put on Safety Glasses
Apply the Optical Gel generously in the area you wish to remove the hair. Then put on the Safety Glasses.
Step 3. Commencing treatment
Place the clear glass surface of the Applicator Head on the skin surface, inside the area to be treated. Once the desired area has been treated, place the Applicator Head back in its cradle. For each flash, an area of 3cm x 2cm is depilated.
There are six strengths you can use. One being the weakest, and six being the highest. The higher the strength, the higher the pain. But also the higher effectiveness.
Approximately 8 days after each treatment, effectively treated hairs will start to fall out progressively (until the 15 days on average). Separated approx 2 months apart. Finally, after about 10 to 12 only 1 or 2 uses per year should be required to keep skin clear and hair free.